Type A27 Safety Valve
safety valves/Pressure relief valve, angle type
low lift Pressure relief valve
metal to metal seated
with plain lever device
Relief valve
threaded connection end
Applications
Provided as safety device for protection against excessive pressure in pressure vessels such as bioler.
Approved for gases, vapours and fluids.
Working temperatures: ≤ 300℃
Standards Compliance
Design and Manufacture: GB/T 12241-2005, GB/T 12243-2005
Face to Face(end to end): JB/T 2203-1999
Test and Inspection: GB/T 12243-2005
Material for main parts
Essential:Valves are delivered at a set pressure, therefore when ordering please confirm set pressure, medium and temperature
TSSafety accessory and Safety protection device Manufacture License of Special Equipment, People s republic of China
Dimensions(mm)
Remark: NPT, R, G thread are acceptedhttp://www.tanhov.com/
Essential:
Valves are delivered at a set pressure, therefore when ordering please confirm set pressure, medium and temperature
TS
Safety accessory and Safety protection device Manufacture License of Special Equipment, People s republic of Chin
Remark: NPT, BSP thread are acceptedhttp://www.tanhov.com/Products/Pressure-relief-Valve.html
Safety decompression valve
Performance & Feature:1. Supply most exact fence of low-pressure and vacuum.2. Soft airproof main safety valve can obtain high airproof in the scope of over 95% lift pressure.3. Pilot valve can adjust lift and close pressure solely out if main valve.4. Capacity is 1.25 times as the same inlet safety valve.
Standards Compliance:Design and Manufacture: API RP 520Face to Face(end to end): API 526Test and Inspection: API 527
TSSafety accessory and Safety protection deviceManufacture License of Special Equipment, People s republic of China
Dimension & Specification
Type A46C - Pilot Operated Safety Valve
Pilot operated pressure relief safety valve, newly structured--is mainly applied to such trades as petroleum &natural gas, chemistry, electric, metallurg & burning gas. It is the best super-pressure protecting equipment on pressure equipment, container or pipeline. It is mainly characteized by shifting direct function of spring to indirect function of quide valve. What s more, main valve, applying for sleeve piston & double sealed seat, is characterized by high precision of action, good recycling function fast turning back to seat, ability to high pressure leaking, long working time and security, together with read-justment on line, automatic turning back to saet after leaking again and again, tight closure,operating and maintaining convenience.
Main property specifiecationhttp://www.tanhov.com/Products/Pressure-relief-Valve.html
Mormal Pressure
PN
150
300
600
900
Body strength
Ps(Mpa)
3.0
7.5
15
22.5
37.5
Set pressure
Pk(Mpa)
0.1-2
1.6-5
3.2-10
8-25
10-25
Seal pressure
Pm(Mpa)
90%Pk
Reseation pressure
Ph(Mpa)
≥90%Pk
Relieving Pressure
Pp(Mpa)
≤1.1Pk
Lift height
H(mm)
≥1/4 d0
Appropriate temp.
≤250℃
Appropriate Medium
Air, oil, water, corrosive medium
Code of throat diameter
Code
Diameter
D
10
L
20
E
13
M
55
F
16
N
60
G
20.5
P
72
H
26
Q
96
J
33
R
115
K
40
T
148
Materials for main parts
NO.
Name of part
Ax46Y/F AF46Y/F Material
KAx46Y/F Material
1
Body
WCB
2
Disc
2Cr13/PTFE
304/PTFE
3
Guide
304
4
Spring
50CrVA
5
O type ring
Viton
6
Bonnet
25
7
Pilot valve
Parts
Essential:Valves are delivered at a set pressure, therefore when orderingplease confirm set pressure, medium and temperature
Type AQ-20 Air Compresssor Safety Valve
Relief valve, angel type
thread end
air compressor specific safety valve
Working temperrature less than 200℃, air compressor specificity safety valve. When the pressure of equiipment exceeding the allowed value, the valve will turn on autommatically and discharge the pressure entirely. When the pressure decrease to the stated value, the valve will quickly turm off antomatically in order to make the equipment run effectively.
Essential